THORENS TD 124 DD Two-Speed Stereo Turntable - Handbuch (Seite 36)

36
Place a record on the turntable, release the
tonearm from its locked position, make sure
that the tonearm lift is set to its lower position
(see page 44) and place the needle in the re-
cord groove approximately in the middle of the
record. Make sure that the tracking force dial
on the top of the tonearm bearing is set to 0.
(Fig. 14) Now carefully turn the tonearm weight
further back until the needle is lifted out of the
groove by the counterweight alone. Now turn
the weight a little bit forward again so that the
weight of the cartridge and the counterweight
are balanced. If you cannot achieve this with the
small weight, the cartridge is too heavy. Please
mount the larger weight as described above
and start again from the beginning.
MOUNTING AND ADJUSTING THE TONEARM WEIGHT
Fig. 14