Metz 42TM92 - Handbuch (Seite 55)

55
Stand Loudspeaker bracket
Right loudspeaker
Left loudspeaker
Plasma monitor
4 screws
M5 x 20mm
4 screws
M5 x 12mm
ቢ
The Plasma TV Set consists of the components: plasma monitor, stand, wall mounting
bracket, two loudspeakers with bases and the tuner box.
Fitting the base
The stand has two vertical panels at the front and back. The (higher) rear panel, with
a slot for the cables, is secured with four screws and must be removed before the
plasma TV set is mounted on the stand.
Slide the stand into the guides on the rear of the TV set and secure it carefully with
four screws (M5 x 20 mm).
Plug in the power cable and the cable to the tuner box, lay them through the slot in
the rear panel and secure the panel to the rear of the stand.
1. Setting up
Front panel, fixed
Rear panel, removed Cable slot
605 47 0024.A1 42TL92 D-GB 02.11.2005 15:59 Uhr Seite 55