HP df840p1 Rahmen für Digitalbilder - Handbuch (Seite 14)

14
Set Schedule
You can schedule the DPF to automatically go into a “stand-by” mode and resume operation according to your weekly
schedule. For example, if you have your DPF on your desk at work, you may want to display the calendar/clock or
play a slideshow from 8:30am to 5:30pm every weekday, and then set the DPF to remain in stand-by mode
throughout the weekend. The following Monday morning, the DPF would resume operation at 8:30am.
1. On the CALENDAR/CLOCK screen, press .
2. Select Set Schedule .
3. Use to move between the fields and to change the field values in Weekdays On/Off .
4. To set the Weekends On/Off , select the Enable Weekends Schedule button, and then use to access the
settings.
5. Use to move between the fields and to change the field values in Weekends On/Off .
6. When correct times are set, select Done to return to the previous screen.
Disable Schedule
After the schedule has been enabled (per above instructions), you can disable the schedule whenever desired.
1. On the CALENDAR/CLOCK screen, press .
2. Select Set Schedule , and then select the Enable Weekdays Schedule or Enable Weekends Schedule button.
The time fields will display OFF .
3. Select Done .
Run the Schedule
After the schedule times have been set (per above instructions), you will use the Run Schedule function whenever
you want the schedule to take effect.
There are two methods for running the schedule, either from a slideshow or from the CALENDAR/CLOCK screen.
CAUTION: After you select the Run Schedule function, any user intervention will cancel the activation (i.e.,
pressing remote or control button, powering off) and the schedule will not take effect until you select
this function again to re-activate.
Run Schedule from Slideshow
1. Start a slideshow, and then press when the Run Schedule button appears (approx 10 seconds). A
small timer clock will appear indicating the schedule is active. To run the schedule when the Run Schedule
button is no longer displayed, restart your slideshow and then press when the Run Schedule button
appears again.
2. The DPF will go into stand-by mode according to the schedule, and when it resumes operation, the
slideshow will again begin
to play.
Run Schedule from CALENDAR/CLOCK Screen
1. On the CALENDAR/CLOCK screen, press .
2. Select Run Schedule . A small timer clock will appear indicating the schedule is active, and then the DPF will
operate according to the set schedule.
3. The DPF will go into stand-by mode according to the schedule, and when it resumes operation, the
Calendar/Clock screen will again be displayed.