HP df840p1 Rahmen für Digitalbilder - Handbuch (Seite 16)

16
Connect DPF to Macintosh Computer
1. Use a USB cable to connect the DPF to your Macintosh computer.
2. Macintosh will recognize the DPF as an external storage device.
3. Drag and drop files between the two devices as you normally move files.
Disconnect DPF from Macintosh Computer
1. To safely disconnect the DPF from your Macintosh, select DPF’s icon on your desktop and press Command‐e to
eject the disk.
2. When the icon is no longer on the desktop, it is safe to unplug the USB cable.
Set Sleep Mode
The DPF will stay on until you power it off, however, to save power you can set it to automatically go into a sleep mode
when left idle for a specific amount of time.
1. On the HOME screen, press to display the Setup Menu .
2. Select Set Sleep Mode , and then select the desired setting.
OFF (default) = Power saver is ‘disabled’; DPF will remain on until you power it off or change the sleep mode setting
2/4/8 Hours = The DPF will automatically go into sleep mode when left idle the specified amount of time
3. Select Done .
Set Language
Depending on model, this DPF may include multiple languages for the user interface display.
1. On the HOME screen, press to display the Setup Menu .
2. Select Set Language , and then select the desired language.
Reset to Factory Defaults
If you have changed function settings, using this feature will restore all settings to the factory pre-set defaults.
1. On the HOME screen, press to display the Setup Menu .
2. Select Reset to Factory Defaults , and then select Yes to reset, or No to leave current settings.
3. Press to return to the HOME screen.