AEG 47995IQ-MN - Handbuch (Seite 29)

CAUTION!
Do not let the removable shelf
supports stay in the appliance
during Pyro Cleaning. There is a
risk of damage.
2. Remove the worst dirt manually.
3. Fully close the oven door.
The Pyro Cleaning procedure
cannot start if you do not close
the oven door.
4. Set the function Pyro Cleaning. Refer
to "Oven functions".
5. When flashes, press + or - to set
the necessary procedure:
– P1 - if the oven is not very dirty.
The procedure is 1 h 30 min long.
– P2 - if the oven is more dirty. The
procedure is 2 h 30 min long.
6. Press to start the procedure. You
can use the End function to delay
the start of the cleaning.
When the oven is at the set temper-
ature, the door locks. The display
shows the symbol
and the bars of
the heat indicator.
To stop Pyro Cleaning before it is
completed, turn the knob for the
oven functions to the off posi-
tion.
When Pyro Cleaning is completed, the
display shows the time of day. The oven
door stays locked. When the appliance is
cool again, an acoustic signal sounds
and the door unlocks.
During Pyro Cleaning the oven
lamp is off.
Cleaning reminder
To remind you that Pyro Cleaning is nec-
essary, PYR flashes in the display for 10
seconds after each activation and deacti-
vation of the appliance.
The cleaning reminder goes out:
• After the end of the Pyro Cleaning
function
• If you press + or - when flashes in
the display.
11.2 Shelf supports
You can remove the shelf supports to
clean the side walls.
Removing the shelf supports
1. Pull the front of the shelf support
away from the side wall.
ENGLISH
29