Gossen DIGISKY Benutzerhandbuch
Seite 11
GOSSEN Foto- und Lichtmesstechnik GmbH
11
2.2
Display ON-Time
If none of the keys on the DIGISKY are activated for a period of approximately 30
seconds, the display panel is switched off automatically (standby), i.e. the display turns
blank but measured values and individual settings are stored.
Stored values can be displayed by pressing any key or adjusting the retractable
diffuser head.
The values from the last measurement are stored until a new measurement is
performed.
2.3
Meter Status
The status of the meter is indicated by means of LEDs.
Right LED
Yellow, blinking
The DIGISKY is on, and if the display is switched off
(standby) it can be reactivated by pressing any key.
Off
The DIGISKY is in the sleep mode. It can be
reactivated by pressing the measurement key (M).
Left LED
Red
Battery is charging
Green
Battery is charged
3
The Retractable Diffuser Head
Spherical Diffuser, Incident Light Measurement, Flat Diffuser, Off
The retractable diffuser head
is DIGISKY’s control centre
and permits easy operation and practical work procedures.
The following measurement types can be selected with the diffuser ring surrounding the
retractable diffuser head:
M
Options for selecting other display on-times can be found in the menu:
Menu
– Settings – Display Off (see page 27).
!!
Caution!
Never attempt to circumvent the interlocking mechanism by turning the retractable
diffuser head with force. This may result in a broken diffuser control unit!
Incident light reading
spherical diffuser
Reflected light reading,
Off
Switch DIGISKY off
OFF
Incident light
measurement,
flat diffuser