Gossen DIGISKY - Handbuch (Seite 21)

GOSSEN Foto- und Lichtmesstechnik GmbH 21
6.2.4 Flash Light Reading
– Radio Power and Modeling Light Control
Additionally to the radio trigger function of the DIGISKY the power of elinchrom RX and
BX series flashes, as well as the broncolor Scoro series S and E can be controlled. The
modeling light can be switched also.
Please check first if all flashes / modules are on and
set on the same RF channel that you have selected
Use the data and the
measurement key to select
flash group All
Use the measurement key
to trigger the flashes
All flashes should have triggered now.
If not all flashes / modules have been triggered please check again your settings
according
6.2.3 Flash Light Reading
– Radio Trigger Settings
Use the ring controller
to select f-stop
Use the ring controller to
change the power
in 1/10 steps
i
In bright surrounding light condition it may be that the changing of the flash head power by e.g.
one exposure value doesn
’t influence the measurement by one exposure value. The power
setting only influences the part of the flash and not the surrounding light which remains
unchanged.
i
If the flash power is changed in total or for one group a new measurement series is necessary.
The DIGISKY do not recalculate all values.
The measurement values shown by the DIGISKY for the complete flashes (All /ST) or of a single
group represent the values of the last measurement!