Gossen DIGISKY - Handbuch (Seite 29)

GOSSEN Foto- und Lichtmesstechnik GmbH 29
8.3.9 Photometry (Movie Only)
Illuminance / Luminance
You may select the readings in Metric (lux and cd/m²) or
British
– US/GB (fc and fL) display.
8.3.10 Menu Reset
– Delete User Settings
Only the settings of the currently selected user are reset to the factory setting values
whereas the settings of the other users and corresponding meter settings remain the
same.
8.4
Meter Settings
8.4.1
LCD Brightness
– Display Brightness
Setting options:

From 50 to 100 in steps of 10
8.4.2
Display off (s)
– Display On-Time
Setting options:

Off

From 30 to 60 seconds in 15 second steps
The DIGISKY display is switched off and set to standby if no modes are activated for
the duration of the selected period of time.
The display is switched back on after activating any key or after having changed the
retractable diffuser head setting. All measured values and settings are retained.
8.4.3
Power off (s)
– Standby Time
Setting options:

Off

From 60 to 240 seconds in 60 second steps
When the DIGISKY is switched to the sleep mode, your settings and measured values
are first stored to memory. When the DIGISKY is reactivated, it returns to the previous
operating mode. All measured values and settings are retained.
The meter can be reactivated by pressing the M key.
i
Standby Time Off
If you have selected on the DIGISKY this setting, the device can be switched in the
Standby mode by turning the head in the off position.