Florabest Garden Pavilion Benutzerhandbuch

Introduction / safety advice / assembly

Advertising
background image

3

GB/IE/CY

Introduction / Safety advice / Assembly



Introduction

Familiarise yourself with the product prior to assembly. Carefully

read the following assembly instructions and safety tips. Only
use the product as instructed and only for the indicated field of

application. Keep instructions in a safe place. Submit all documents to a third
party if distributing the product.



Proper Use

This product is intended for use as a shield for privacy and protection against
the sun shine. The material is not permanently waterproof. The marquee should
therefore not be used in the rain. Any use other than that described or any
modification of the product is not permissible and may result in injury and /
or damage to the product. The manufacturer is not liable for damage caused
by improper use. The product is not intended for commercial use.



Description of parts

1

Marquee with folding frame

2

Rope

3

Side wall with window

4

Side wall

5

Peg

6

Telescopic leg

7

Sliding clip

8

Locking pin (folding frame)

9

Locking pin (telescopic leg)

10

Telescopic foot

11

Foot plate

12

Corner canopy

13

Metal pin

14

Plastic ring

15

Framework (folding frame)

16

Hook and loop strap



Dimensions and material

Dimensions (assembled): approx. 300 x 300 x 260 cm (L x W x H)
Dimensions (packed):

approx. 120 x 22 x 22 cm (L x W x H)

Material:

Aluminium and 100% polyester



Supply scope

1 x gazebo with folding frame
1 x side wall
1 x side wall with window
4 x rope
8 x peg
1 x storage bag with carrying handle
1 x assembly instructions

Safety advice



WARNING!

RISK OF LOSS OF LIFE OR ACCIDENT

TO INFANTS AND CHILDREN! Never leave children
unsupervised with the packaging material or the product. The

packaging material presents a suffocation hazard and there is a risk of
loss of life from strangulation. Children often underestimate danger. Always
keep the product out of reach of children.

 CAUTION! RISK OF INJURY! Ensure that all parts are undamaged

and have been assembled appropriately. Risk of injury exists if assembled
incorrectly. Damaged parts can effect safety and function.

 CAUTION! Do not leave children unattended. The product is not a

climbing frame or toy. Make sure that nobody climbs or leans on the
product, particularly children. The product could become imbalanced
and tip up. This may result in injury and / or damage.

 CAUTION! RISK OF INJURY! Never under any circumstances

assemble the product in a strong wind.



Select a piece of land that is as flat and firm as possible to erect your tent.



Sandy surfaces reduce the stability of the tent. Please ensure that the
surface provides a firm hold for the tent pegs.



Never knock the tent pegs into the ground with force! If necessary, the
guy lines should only be extended with the help of a loop and the tent
peg positioned in a different location.



The intactness of all connection points and the guy lines should be
checked regularly, as should the firmness of the tent pegs in the ground.



Assembly in the incorrect order could damage the marquee. The
manufacturer assumes no liability of any kind.

 CAUTION! DANGER OF POISONING AND DAMAGE TO

PROPERTY! Do not light any fires within the product and keep it away
from sources of heat.



It is not recommended to take away any sewn label.



Please familiarise yourself with the local fire protection regulations.



This pavilion is constructed for a quick erection and dismantling and is
not suitable for long- term use.



Do not use by wind, rain and snow, the product can be damaged.



Keep the pavilion away from open fire and more immoderate heat.



Dismantle the pavilion by adverse weather conditions.

Take note of the effects of the weather and climate



When selecting the location to put up your tent, you should always
consider the local situation and how this might change. Will the terrain
turn into a lake if it rains? Please take into account any rising rivers and
incoming tides.



Protect the product against strong wind and storms. Place the product in
a location that is protected from the wind if possible.



Make sure that the marquee is not pulled too taut when assembled;
otherwise it cannot adjust to changing wetter conditions and may be
damaged.



Do not pull the peg out of the ground together with the rings or on the ropes.



Do not use insect spray in or on the marquee.



Never wash the marquee in the washing machine or with chemical
cleaning agents.



Always store the marquee in a dry place; otherwise the fabric may be
damaged, or the poles may rust.



Minor leaks in the seams can be repaired with a seam spray, and an
impregnating spray can be used for the tent skin.



Assembly

Note: you will need at least three other people to help you assemble and
dismantle the marquee.
Tip: familiarise yourself with assembly of your marquee, preferably before
using it for the first time, and assemble it accordingly. As you do so, check
that you have all parts and that they are in perfect condition.



Choosing a location

The ground should be flat, clean and without any unevenness. Remove any
sharp or pointed objects (e.g. stones, branches, etc.) before assembly. Make
sure that the marquee is positioned so that the open sides are out of the wind.



Marquees are not permitted in some places. Please observe local regulations.



When choosing a location, bear in mind that you will need additional
space beyond the surface area of the marquee itself (3 x 3 m) for the
ropes

2

. Please also make sure that there is sufficient space around the

outside of the marquee and that no tripping hazards are created.

Advertising