AUDIOLINE Watch&Care V120 - Handbuch (Seite 17)

3
GB
Starting Up
a
Important
: please make sure you’ve read the safety information on page 9 before you set up
your system.The data transmitted (image and/or sound) are digitally coded.
Checking the package contents
The package contains:
• One camera unit (transmitter)
• One monitor unit (receiver) with belt clip
• One rechargeable battery pack for the receiver
• One power adapter plug for the transmitter
• One charger with power adapter plug for the receiver
• One operating manual
Connecting and aligning the transmitter
a
Attention
: Position the transmitter with a minimum distance of 1 m to other electronic devices,
otherwise there is a risk of mutual disturbance. Point the upper section of the transmitter towards the
baby or object you want to monitor. Check that the baby or object is suitably displayed on the
receiver.
Operating with batteries (not supplied)
Use a small screwdriver to open the transmit-
ter’s battery compartment on the underside.
Insert the batteries, paying attention to correct
polarity. Refer to the diagrams in the battery
compartment. Close the battery compartment
again.
The transmitter is operated by means of 4 AAA Alkaline batteries (not contained in the material
supplied). The transmitter cannot be charged. Insert the batteries before connecting the power
adapter plug.
In the case of a low battery charge, the Power LED flashes slowly. The batteries must be replaced.
Operating with a power adapter plug
Connect the transmitter as illustrated in the diagram. For safety reasons, only use the power adapter
plug supplied.
D C 6 V
Mains power outlet
Starting Up
BA Audioline 4 250711 991272 Watch&Care V120_V1_0_DE_GB_191212_Serie_Layout 1 19.12.12 15:51 Seite 3