AUDIOLINE Watch&Care V120 - Handbuch (Seite 22)

Switch off: press the button briefly.
Intercom function
Press and hold the button.
This icon appears in the display.
Speak into the microphone to talk with the person near the other unit. When the talking
button is pressed, any playing of lullabies will be aborted.
Range
When the distance between the transmitter and receiver is too far, the message “Out of Range“ appe-
ars in the display and you hear a beep. Move the receiver nearer to the transmitter. If necessary, opti-
mum range can be achieved if both the Baby unit and Parent unit antennas are extended vertically.
Registration
In delivery state the transmitter is pre −registered at the receiver. If necessary or if a another camera
is added to the system, registration can also be completed manually:
1 Switch the transmitter off (switch set to OFF). Remove the batteries of the receiver for a few
seconds if necessary.
2 Switch the receiver on.
3 Press the menu key repeatedly until [C1] appears in the display.
4 Use the buttons to select the desired camera [C1] ... [C4].
5 Press and hold down the button for approx. 2 seconds. appears in the display.
6 Press the button briefly. The Link LED flickers for approx. 10 seconds.
7 Switch the transmitter on (switch set to ON).
8 Press the registration key on the back side of the transmitter. After a short
time the video from the transmitter will appear on the screen if the registra -
tion was successful.
If the registration failed, “Out of Range“ appears on the screen.
Multi camera mode
If you registered several cameras (up to 4) to your system, you can select a single camera or switch
to scan mode. In scan mode, the signals from all cameras are continuously displayed alternately
each for about 7 seconds.
Press the button seven times.
The number of the selected camera is shown.
Use these buttons to select a camera or the scan mode.
For each of the four cameras you can select the features settings individually.
Operating the Receiver
8
BA Audioline 4 250711 991272 Watch&Care V120_V1_0_DE_GB_191212_Serie_Layout 1 19.12.12 15:51 Seite 8