AUDIOLINE Watch&Care V120 - Handbuch (Seite 20)

Operating the Receiver
Check the transmitter and receiver are working properly each time before the equipment is put into
operation.
Switching the receiver on/off
Press and hold this button until the logo appears first then the image being taken by the
transmitter camera.
Press and hold the button for approx. 1 second to switch the unit off.
In the case of a low battery charge, the Power LED flashes slowly. Place the receiver in the charger
to recharge the battery pack.
Setting the brightness
Press the button once.
This icon appears in the display.
Use these buttons to adjust the brightness to one of five settings.
Temperature option
IMPORTANT INFORMATION
The ideal temperature for a baby to sleep is 16° - 18 °C. Please set or
adjust the room temperature accordingly.
Press the button twice.
This icon appears in the display.
Use these buttons to set temperature measurement to OFF, °C or °F.
18°C
The current temperature is displayed during the temperature measurement, e.g. in °C.
An alert will occur if the temperature becomes outside the preset temperature range
(15°C - 25°C).
Note
: The upper and lower room temperature settings for the alarm are for guidance only and are not
a substitute for personal supervision. In extreme temperature conditions during summer or winter the
upper and lower temperature settings for the alarm may be exceeded and result in the room tempera-
ture warning being activated. Under such conditions appropriate actions should be taken by the
parent or guardian to ensure the health and safety of the child and on the basis that the room conditi-
ons are considered satisfactory then the temperature warning option can be temporarily disabled.
Switching the night light on/off
Press the button three times.
This icon appears in the display.
Operating the Receiver
6
BA Audioline 4 250711 991272 Watch&Care V120_V1_0_DE_GB_191212_Serie_Layout 1 19.12.12 15:51 Seite 6