Clearaudio TQ-I (Tangential) - Handbuch (Seite 21)

clearaudio-TQ-I
User manual / Bedienungsanleitung
Seite/Page 21  clearaudio electronic GmbH 2015
Slide the headshell with the cartridge through the proper drill in the carriage of the tonearm. For this,
lift up with the cuing lever that the headshell will be positioned under the rope of the cuing-lever-unit
(as shown in the picture). Connect the pins of the tonearm cable with the corresponding pins of the
cartridge. Please take care of the colour codes.
Lock the headshell in this position with the screw on the underside of the carriage with the screw
driver. Take one or more counterweight(s) (it depends on the weight of cartridge) and slide them onto
the headshell. To fix the counterweight(s) use the screwdriver.
62 mm