Clearaudio TQ-I (Tangential) - Handbuch (Seite 24)

clearaudio-TQ-I
User manual / Bedienungsanleitung
Seite/Page 24  clearaudio electronic GmbH 2015
After that you have to adjust the azimuth (vertical needle-position in the groove). Take a straight bar
or rod which is possible to be placed on the top of the cartridge. Place this piece on your cartridge as
shown in the picture. Lift your cartridge up (!) before doing this. Then lift your cartridge down on the
LP and make sure that the straight bar or rod is parallel to the turntable platter. You will have to
loosen the screw in the carriage holding the headshell in order to change the horizontal position of
the cartridge. Lock this screw again after finished your adjustments. Please take care, that during
this installation the position of the tonearm will not be changed.