Clearaudio TQ-I (Tangential) - Handbuch (Seite 23)

clearaudio-TQ-I
User manual / Bedienungsanleitung
Seite/Page 23  clearaudio electronic GmbH 2015
The following step will ensure real linear tracking. You will need the delivered linear gauge for this
adjustment. Slide the gauge over the spindle of the platter and turn it under the chassis of the
tonearm. Please remove the LP if used one before ! Lift the cartridge down and position the diamond
on the black line of the gauge. Do this step at the „beginning“ and also at the „end“ of the „LP“
(imagine that there is now one on your platter). This adjustment is successful, if the diamond is in all
positions on the black line. To change the position of of the diamond, please unlock the screw on the
top of the carriage with the hex key wrench and move the headshell forward or backward until the
diamond sits exact on the black line. This adjustment is very important to ensure the real linear
tracking ability of your tangent.
Position 1 Position 2