ABUS CASA10010 - Handbuch (Seite 34)

34
English
Enter the network information of the PIR-IP network camera in the configuration and click “Save”. The IP
alarm module is now synchronized with the network information of the camera.
Integration: Choose “Yes” or “No” to transmit the settings to camera after pushing “OK” or not.
Username: Enter the username which is stored in the TVIP41550.
Password: Enter the password of the TVIP41550.
Device IP: Enter the current IP address of the TVIP41550.
Port: Enter the network port.
After confirmin with “OK” the IP alarm module automatically configures the virtual inputs and outputs of
the PIR network camera.
7.2 Configuration of the PIR network camera for remote control and magnetic contact
Please access to the PIR network camera.You can find the camera in the network with the software
“Installation wizard 2”. Also you can directly enter the IP address in the browser address bar.
Open the web interface of the PIR network camera and go to “Configuration”. Choose the menu item
“Guardmode”.