AUDIOLINE TEL 19 - Handbuch (Seite 21)

- Operation -
21
4 Operation
4.1 Making a call using the receiver or handsfree feature
The telephone can be used like any conventional telephone and, in addition, has some useful
special features, which make phoning considerably easier for you. You have two ways of
making a call:
A: Making a call using the receiver
1.
Lift the receiver and wait until you hear a dialling tone.
2. Now dial the required telephone number. If the receiver volume is too quiet
or too loud, you can change this to suit your requirements, with the small
switch on the receiver.
3. To end the call, replace the receiver.
If you want to change during a call from the receiver to the handsfree facility, press the
button and replace the receiver on the rest.
B: Making a call using the handsfree facility
1. Press the handsfree button . The LED above the button will come on and
you will hear the dialling tone from the in-built loudspeaker.
2. Now dial the required telephone number.
If the other party accepts the call, his voice will be heard over the in-built loudspeaker. When
using the handsfree facility always speak loudly and clearly towards the telephone.
The volume can be adjusted using the or buttons next to the handsfree
button. The handsfree volume resets to the default position after each call.
3. To end the call, press the handsfree button or replace the receiver.
If you want to change from the handsfree facility to the receiver, simply lift the receiver.
4.2 Receiving Calls
Calls can be accepted either by using the receiver or by using the handsfree facility. Lift the
receiver or use the handsfree facility by pressing the handsfree button .
To end the call, replace the receiver or press the handsfree button .