AUDIOLINE TEL 19 - Handbuch (Seite 23)

- Storing telephone numbers -
23
5 Storing telephone numbers
You can store 13 numbers in your telephone. Three numbers can be stored under the direct
dial buttons M1, M2 and M3 and 10 additional numbers under the speed dial buttons. The
numbers 0 to 9 on the number pad are used as speed dial buttons.
5.1 Saving a number under a direct dial button
1. Lift the receiver or press the handsfree button .
2. Press the Store button .
3. Enter the required telephone number with a maximum of 16 digits using the number pad.
Note: If you enter the wrong number, you can break off the process at this point by
pressing the handsfree button.
4. Press the Store button .
5. Now press one of the three direct dial buttons M1, M2 or M3 or a number between 0 and
9 on the number pad for the speed dial buttons .
6. Replace the receiver or press the handsfree button again to complete the save
procedure.
Tips on storing numbers:
Storage locations that have already been used cannot be erased. Simply save a new number
in the storage location that you want to erase.
The storage locations can be written on the index card so that you do not forget where the
numbers have been stored. You can remove the protective transparent cover using a ballpoint
pen or a small pin.
5.2 Making a call using the direct dial buttons
1. Lift the receiver or press the handsfree button .
2. Now press the required direct dial button M1, M2 or M3. The stored number will now be
dialled automatically.
3. To end the call, replace the receiver or press the handsfree button once more.
5.3 Making a call using the speed dial buttons
1. Lift the receiver or press the handsfree button .
2. Press the speed dial button .
3. Now press the required storage location between 0 and 9 on the keypad. The stored
number will now be dialled automatically.
4. To end the call, replace the receiver or press the handsfree button once more.