Silvercrest SKM 350 A1 - Handbuch (Seite 9)

7 GB
8. Figures C+D: turn the bowl11 in a
clockwise direction as far as it will go,
until the symbol 16 points to the bot-
tom marking on the bowl12.
9. Insert the mains plug14 into a wall sock-
et corresponding to the technical data.
7. Operation
DANGER! Risk of injury from
cutting!
• The insert holder6, the blade insert8
and the dough blade7 keep on turning
after the device has been turned off.
Please wait until all parts have come to
a standstill before unlocking the
bowl11 and opening the lid3.
• The device must never be operated with-
out the bowl11.
WARNING! In order to prevent damage to
the device, interrupt the blending process im-
mediately if the insert holder6, the blade in-
sert8 and the dough blade7 are not turning
or are turning with difficulty. If this happens,
pull out the mains plug14 and check wheth-
er there is something in the bowl11 blocking
movement or whether the food is too tough.
Also check whether the device is assembled
correctly.
CAUTION: depending on the hardness and
consistency of the foodstuffs, do not fill the
bowl11 to the maximum, as the insert hold-
er6, the blade insert8 and the dough
blade7 could get blocked. Pay attention
here to the guideline values for various foods
in the "Processing table" section.
NOTE: for chopping harder foodstuffs, use
the setting P. Work with short pulses (1 pulse:
turn on P for approx. 1 second). The number
and length of the pulses will depend on the
quantity and consistency of the food.
Uses
Blade insert: the blade insert8 is suitable
for chopping solid foods, e.g. meat, onions
and cheese.
Dough blade: the dough blade7 is suita-
ble for e.g. mixing egg yolks.
Slicing insert / Grating disk:
With the slicing insert4 you can cut e.g. cu-
cumbers into slices. The grating disk5 is suit-
able for e.g. processing apples or carrots.
__RP96282_B6.book Seite 7 Dienstag, 14. Januar 2014 9:20 09