AMICA KMI 13290 F DE - Handbuch (Seite 52)

52
OPERATION
Booster function „P”
The Booster Function increases the nominal
power of the 210 mm cooking zone from 2100 W
to 3700 W.
When a cooking zone is active ( 3), activate
the booster function by touching the „ P” sen-
sor field ( 6). Activation of the booster function
will be indicated by the letter „ P” shown on the
relevant cooking zone display ( 3).
To switch off the Booster function, touch the
heat setting selection sensor field ( 2) and
reduce the heat setting, or lift the pot from
the cooking zone.
Operation of the Booster function is
limited to 10 minutes. Once the Bo-
oster function is automatically deac-
tivated, the cooking zone continues
to operate at its nominal power. The
Booster function can be reactivated,
provided the appliance electronic
circuits and induction coils are not
overheated.
When the pot is lifted from the co-
oking zone when the Booster func-
tion is in operation, it remains active
and the countdown continues.
Selecting the cooking zone heat setting
When the cooking zone display ( 3) shows „0” and a decimal point, start setting the desired
heat setting by sliding your finger across the heat selection sensor field ( 2).
If none of the sensor fields is touched within 20 seconds then the cooking zone
switches off.
When the appliance electronic circuits or
induction coils overheat when the Booster
function is in operation, it is automatically
deactivated. The cooking zone continues
to operate at its nominal power.
A cooking zone is active when its display shows a digit or a letter and a decimal point.
This indicates the cooking zone is ready for the heat setting to be set or changed.
6 2
3