AMICA KMI 13290 F DE - Handbuch (Seite 57)

57
OPERATION
Timer function
Timer function makes cooking easier by making it possible to set cook time. It can also be
used as a Kitchen Timer.
Setting the Timer
Timer function allows the cooking zone to be
switched off after the set time has elapsed.
The timer function can only be set when a
cooking zone is operating (heat setting is
greater than „ 0”). The timer function can be
set independently for all individual cooking
zones. Timer countdown can be set from 1
to 99 minutes.
To set the timer:
• select a cooking zone by touching cooking
zone selection sensor field ( 3) and select
the desired heat setting from 1 to 9 by
sliding your finger across the heat setting
selection sensor field ( 2). The display will
show all the selected heat settings from
1 to 9 and a decimal point (for example
” 4.”).
• then, during the next 10 seconds, touch
the Timer selection sensor field ( 4). „0 -”
will be shown on the Timer display ( 4) and
the appropriate Timer activation pilot light
( 5) will light up to indicate activation of the
Timer function for the relevant cooking
zone.
• Now, select the desired Timer setting by
sliding your finger across the setting se-
lection sensor field ( 2). The second digit is
set first and the first digit is set next. Once
the second digit is set, it will be shown on
the display and the timer will automatically
allow you to set the first digit by showing
the dash „ -” symbol (for example „- 6”).
If no setting for the first digit is chosen
within 10 seconds, the dash „ -” symbol
will be replaced with „ 0” (for example „0 6”).
The countdown starts when the Timer
activation pilot light ( 5) stops flashing.
5
4
3
2
5
4
3
2
5
4
3