AMICA KMI 13290 F DE - Handbuch (Seite 59)

59
OPERATION
Stopping Kitchen Timer
When the set time has elapsed an acoustic signal is sounded, which can be muted by touching
any sensor field. If no sensor field is touched, the acoustic signal will stop automatically after
2 minutes.
To stop the Kitchen Timer ahead of time touch the on/off sensor (
1) twice. All displays will
go out.
Kitchen Timer
When no cooking zones are in use, the Timer function can be used as a regular Kitchen
Timer.
Setting Kitchen Timer
When the appliance is off:
• Switch the appliance on by touching the
on/off sensor ( 1). „0” will be shown on
cooking zone displays ( 3) and the LED
pilot light will light up above the on/off
sensor ( 1).
• then, during the next 10 seconds, touch
the Timer selection sensor field ( 4). „0 -”
will be shown on the Timer display ( 4).
• Now, select the desired Timer setting by
sliding your finger across the setting se-
lection sensor field ( 2). The second digit is
set first and the first digit is set next. Once
the second digit is set, it will be shown on
the display and the timer will automatically
allow you to set the first digit by showing
the dash „ -” symbol (for example „- 6”). If
no setting for the first digit is chosen within
10 seconds, the dash „ -” symbol will be
replaced with „ 0” (for example „0 6”). The
countdown starts when „ 0” goes out on
cooking zone displays ( 3).
4
3 3
1
4
4
3
2