Festo Измерительный блок ASDLP - Handbuch (Seite 15)

ASDLP-...
Festo ASDLP-... 0205VV English
15
5 Fitting
Wiring the circuitry
Please note
Excessive speeds will damage the measuring unit(see Chapter “Technical
Data”).
S
Make sure that the AS-DLP-... is always used without a emergency tripping
circuit on the DLP-... .
Fitting the mechanical components
Please note
Transverse loads on the connecting rod will damage the internal coupling.
S Make sure that the maximum permitted loads are not exceeded.
Transverse loadings = zero.
S Make sure that the slide can be fastened with elements aJ as shown in Fig. 6.
If fastening the AS-DLP-... to the slide,
S use a self-aligning rod coupler.
Depending on size, dimension L will have
the values shown in Fig. 2.
Depending on
size Dimension L
80 81.5 mm
100 93 mm
125 109 mm
160 127 mm
Fig. 2
L