Festo Измерительный блок ASDLP - Handbuch (Seite 19)

ASDLP-...
Festo ASDLP-... 0205VV English
19
S Push the adapter sleeve onto the posi-
tioning shaft 5.
S Tighten only slightly the threaded screws
7 of the adapter sleeve.
S Place the positioning unit on the position-
ing shaft, at the same time turning the
adapter sleeve.
If the unit is fitted in the correct position,
a lug on the front recess of the adapter
sleeve will lock into the locating hole in
the positioning unit.
S Tighten the fastening screws of the posi-
tioning unit in the threaded holes 4.
Tightening torque: 2 Nm.
S Tighten the threaded screws 7 in the
adapter plate.
Tightening torque: 1,1 Nm ± 10 %.
Fig. 9
Fig. 10