AEG BE7004001M - Handbuch (Seite 17)

Touch or to change the let-
ter. Press OK.
6. Touch or to move the cursor
to the right or to the left. Press OK.
The next letter flashes. Do steps 5
and 6 again as necessary.
7. Press and hold OK to save.
Useful information:
• You can overwrite a memory position.
When the display shows the first free
memory position, touch
or and
press OK to overwrite an existing pro-
gramme.
• You can change the name of a pro-
gramme in the menu Edit Programme
Name .
Activating the programme
1. Activate the appliance.
2. Select the Favourite Programme
menu. Press OK to confirm.
3. Select your favourite programme
name. Press OK to confirm.
Press to go to Favourite Programme
directly. You can also use it when the ap-
pliance is deactivated (for selected mod-
els only).
10.2 Function Lock
The Function Lock prevents an acciden-
tal change of the heating function. You
can activate the Function Lock only when
the appliance operates.
Activating the Function Lock :
1. Activate the appliance.
2. Set a heating function or setting.
3.
Press again and again until the
display shows Function Lock.
4. Press OK to confirm.
Deactivating the Function Lock :
1. Press . The display shows a mes-
sage.
2.
Press and then OK to confirm.
10.3 Child Lock
The Child Lock prevents an accidental
operation of the appliance .
Activating and deactivating the Child
Lock function:
1. Touch and at the same time
until the display shows a message.
If the appliance has the Pyrolytic
cleaning function, the door is
locked and the symbol of a key
comes on in the display.
A message comes on in the dis-
play when you touch a sensor
field.
To unlock the appliance, touch and
at the same time again until the dis-
play shows a message.
10.4 SET + GO
The SET + GO function lets you set a
heating function (or programme) and
use it later with one press of the sensor
field.
Activating the function:
1. Activate the appliance.
2. Set the heating function.
3. Press again and again until the
display shows Duration .
4. Set the time.
5. Press again and again until the
display shows SET + GO .
6. Press OK to confirm.
To start SET + GO , press any sensor
field (except for
). The set heating
function starts.
When the heating function ends, an
acoustic signal sounds.
Useful information:
• When the heating function operates,
the Function Lock is on.
• You can activate and deactivate the
SET + GO function in the Basic Set-
tings menu.
10.5 Automatic switch-off
For safety reasons the appliance deacti-
vates after some time:
• If an oven function operates.
• If you do not change the oven temper-
ature.
ENGLISH
17