Installation, 1 building in – AEG BE7004001M Benutzerhandbuch
Seite 32
Problem
Possible cause
Remedy
The display shows
“Demo”. The appli-
ance does not heat
up. The fan does
not operate.
The test mode is activated.
1.
Deactivate the appli-
ance.
2.
Touch and hold
un-
til the appliance acti-
vates and deactivates.
The sensor field is illu-
minated.
3.
Touch and hold
and
at the same time
until an acoustic signal
sounds and the sensor
field is off. “Demo”
goes out.
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavi-
ty.
We recommend that you write the data here:
Model (MOD.)
.........................................
Product number (PNC)
.........................................
Serial number (S.N.)
.........................................
14. INSTALLATION
WARNING!
Refer to the Safety chapters.
14.1 Building In
573
594
5
589
558
548
20
min. 550
20
590
min. 560
32 www.aeg.com