11 lock, 12 child safety device, 14 automatic switch-off – AEG 40095VD-MN Benutzerhandbuch
Seite 13

5.11 Lock
When the cooking zones operate, you
can lock the control panel but not
. It
prevents an accidental change of the
heat setting.
This function does not deactivate the
timer function.
1.
Set the heat setting.
2.
To activate this function, touch
.
The display shows the symbol
for
4 seconds.
3.
To deactivate this function, touch
. The display shows the heat setting
that you set before.
When you deactivate the appli-
ance, the function is deactivated.
When you activate the appliance, the
display shows SAFE .
5.12 Child safety device
This function prevents an accidental op-
eration of the hob.
Activating the child safety device
1.
Touch
to activate the hob. Do
not set the heat settings.
2.
Touch
for 4 seconds. The display
shows the symbol
. The child
safety device operates.
3.
Touch
to deactivate the hob.
Deactivating the child safety device
1.
Touch
to activate the hob. Do
not set the heat settings.
2.
Touch
for 4 seconds. The display
shows the symbol
.
3.
Touch
to deactivate the hob.
Overriding the child safety device for
one cooking session
1.
Touch
to activate the hob. The
display shows the symbol
.
2.
Touch
for 4 seconds.
3.
Set the heat settings in less than 10
seconds. You can operate the hob.
4.
When you deactivate the hob, the
child safety device operates again.
5.13 OptiHeat Control (three-
step residual heat indicator)
OptiHeat Control shows the level of re-
sidual heat (
\
\
). The induction
cooking zones create the heat for cook-
ing directly in the bottom of the cook-
ware. The heat of the cookware heats
the glass ceramic.
WARNING!
There is a risk of burns from re-
sidual heat.
5.14 Automatic switch-off
The hob deactivates automatically if:
• All cooking zones are deactivated .
• You do not set the heat setting after
you activate the hob.
• You spill something or put something
on the hob control panel for more
than 10 seconds (a pan, a cloth, etc.).
An acoustic signal sounds and the hob
deactivates. Remove the object or
clean the control panel.
• The hob becomes too hot (e.g. when
a saucepan boils dry). Before you use
the hob again, the cooking zone must
be cool.
• You use incorrect cookware. The dis-
play shows the symbol
and the
cooking zone deactivates automatical-
ly after 2 minutes.
• You do not deactivate a cooking zone
or change the heat setting. After some
time (see the table), the display shows
the symbol
and the hob deacti-
vates.
Heat setting
Switch-off time
-
6.0 h
-
5.0 h
-
4.0 h
-
1.5 h
ENGLISH
13