Ereignisprotokollmeldungen, Offload-iscsi-treiber (ois-treiber) – Dell Broadcom NetXtreme Family of Adapters Benutzerhandbuch
Seite 104

iSCSI-Protokoll: Broadcom NetXtreme-II®Netzwerkadapter Benutzerhandbuch
file:///C|/Users/Nalina_N_S/Documents/NetXtremeII/German/iscsi.htm[9/5/2014 3:49:06 PM]
Ereignisprotokollmeldungen
werden die Ereignisprotokollmeldungen für den Offload-iSCSI-Treiber aufgelistet.
Offload-iSCSI-Treiber (OIS-Treiber)
Tabelle 5. Ereignisprotokollmeldungen für den Offload-iSCSI-Treiber (OIS-Treiber)
Meldungsnummer Schweregrad Benachrichtigung
1
Fehler
Initiator failed to connect to the target. Target IP address and TCP Port number are
given in dump data.
2
Fehler
The initiator could not allocate resources for an iSCSI session.
3
Fehler
Maximum command sequence number is not serially greater than expected command
sequence number in login response. Dump data contains Expected Command Sequence
number followed by Maximum Command Sequence number.
4
Fehler
MaxBurstLength is not serially greater than FirstBurstLength. Dump data contains
FirstBurstLength followed by MaxBurstLength.
5
Fehler
Failed to setup initiator portal. Error status is given in the dump data.
6
Fehler
The initiator could not allocate resources for an iSCSI connection
7
Fehler
The initiator could not send an iSCSI PDU. Error status is given in the dump data.
8
Fehler
Target or discovery service did not respond in time for an iSCSI request sent by the
initiator. iSCSI Function code is given in the dump data. For details about iSCSI
Function code please refer to iSCSI User's Guide.
9
Fehler
Target did not respond in time for a SCSI request. The CDB is given in the dump data.
10
Fehler
Login request failed. The login response packet is given in the dump data.
11
Fehler
Target returned an invalid login response packet. The login response packet is given in
the dump data.
12
Fehler
Target provided invalid data for login redirect. Dump data contains the data returned by
the target.
13
Fehler
Target offered an unknown AuthMethod. Dump data contains the data returned by the
target.
14
Fehler
Target offered an unknown digest algorithm for CHAP. Dump data contains the data
returned by the target.
15
Fehler
CHAP challenge given by the target contains invalid characters. Dump data contains the
challenge given.
16
Fehler
An invalid key was received during CHAP negotiation. The key=value pair is given in the
dump data.
17
Fehler
CHAP Response given by the target did not match the expected one. Dump data
contains the CHAP response.
18
Fehler
Header Digest is required by the initiator, but target did not offer it.
19
Fehler
Data Digest is required by the initiator, but target did not offer it.
20
Fehler
Connection to the target was lost. The initiator will attempt to retry the connection.
21
Fehler
Data Segment Length given in the header exceeds MaxRecvDataSegmentLength
declared by the target.
22
Fehler
Header digest error was detected for the given PDU. Dump data contains the header
and digest.
23
Fehler
Target sent an invalid iSCSI PDU. Dump data contains the entire iSCSI header.
24
Fehler
Target sent an iSCSI PDU with an invalid opcode. Dump data contains the entire iSCSI
header.
25
Fehler
Data digest error was detected. Dump data contains the calculated checksum followed
by the given checksum.
26
Fehler
Target trying to send more data than requested by the initiator.
27
Fehler
Initiator could not find a match for the initiator task tag in the received PDU. Dump data
contains the entire iSCSI header.
28
Fehler
Initiator received an invalid R2T packet. Dump data contains the entire iSCSI header.