Safety sign location super rake, Speed boss – Smithco Diesel Super Rake 17-001 Operator Manual Benutzerhandbuch
Seite 6

5
Safety Sign Location Super Rake
ZU BEACHTEN: Beschädigte, entfernte oder unleserlich gewordene Sicherheitsschilder müssen
ersetzt werden. Wenn ein Teil ausgetauscht wird, an dem ein Sicherheitsschild angebracht ist,
muss das neue Teile wieder mit dem Sicherheitsschild versehen werden. Neue
Sicherheitsschilder sind bei Ihrem Vertragshändler oder beim Hersteller erhältlich.
.
25-352-P
By-pass V
alve
This valve should be completely closed
when running the unit. The valve is closed
by turning clockwise. This valve can be
opened to push the unit when the engine
is not running.
Towing the Machine
The machine can be moved for a short
dist
ance with the engine of
f, but we
do not
recommend this as a st
andard procedure. When
towing
do not
tow the machine faster than
2-3 MPH (3-5 km/h) because the drive system
may be damaged.
The tires may lock up if the
machine is towed too fast. If this occurs, stop
towing the machine. If the machine must be
moved a considerable dist
ance, transport it on
a truck or trailer
.
Speed Boss
by
Speed Boss allows the machine to
operate at a proper speed while
raking bunkers on golf courses.
This speed has been factory set at an
average speed of 3-4 MPH (5-6.5 kph).
It may be re-set to any desired
operating speed. See Manual for
instructions.
CAUTION
: When the rear rake
attachment is lowered while the
machine is in forward motion, the
forward speed of the machine will
slow drastically. Operator should be
prepared for rapid change in speed.
U.S. Patent # 5,725,068 25-337-P