Florabest FBM 450 A1 - Handbuch (Seite 11)

11
GB IE
smoke whilst refuelling;
- Fill with petrol before starting the
engine. Do not open the filler cap or
refill with petrol whilst the engine is
running or the equipment is hot:
- If petrol is spilled, do not attempt to
start the engine. Instead, remove the
equipment from the surface on which
the petrol has been spilled. Avoid
any ignition attempt until the petrol
fumes have evaporated;
- For reasons of safety, replace petrol
and other filler caps in the event of
damage.
• Replace defective silencers.
• Before use, always carry out a visual
inspection to check whether the cutting
tools, mounting bolts and entire cutting
unit are worn or damaged. To avoid
imbalance, only replace worn or dam-
aged tools and bolts in sets.
• Take care with equipment that has
several cutting tools, as the movement
of one blade may result in rotation of
other blades.
• Use only replacement parts and ac-
cessories supplied and recommended
by the manufacturer. The use of parts
from other manufacturers may result
in injuries and will result in immediate
invalidation of the guarantee.
Handling:
• Do not run the combustion engine in
enclosed spaces, in which dangerous
carbon monoxide can collect.
• Mow only in daylight or with good
artificial lighting. An unlit working area
can result in accidents.
• If possible, avoid using the equipment
on wet grass.
• Always ensure secure positioning, par-
ticularly on hillsides, landfills, ditches or
dykes. This will give you better control
of the equipment in unexpected situa-
tions.
- Always work across the slope, never
upwards or downwards.
- Take particular care when changing
the direction of travel on the slope.
- Do not mow on excessively steep
slopes (max. 10°).
• Run the equipment only at walking
speed.
• Take particular care when turning the
equipment around or pulling it towards
you.
• Stop the cutting tool if the equipment
has to be tipped up for transportation
over a surface other than grass and
when moving the equipment from and
to the surface to be mown.
• Do not use the equipment with dam-
aged safety equipment or guards or
with no safety equipment attached, e.g.
impact protection and/or grass catch-
ers. This ensures that the equipment
remains safe.
• Do not change the engine regulator
setting and do not over-rev it. This may
damage the equipment.
• Before starting, the engine, disengage
all cutting tools and drives.
• Start or operate the start switch with
care and in accordance with the manu-
facturer’s instructions. Ensure sufficient
space between feet and the cutting
tool. Risk of injury.
• When starting or activating the engine,
do not tip the equipment unless the
equipment has to be lifted for this pro-
cedure. In this case, tip the equipment
only as far as is absolutely necessary
and lift only the side that is away from
the user.
• Do not start the engine when standing