Pioneer CT-W505R - Handbuch (Seite 33)

System............................................................4-track, 2-channel stereo
Heads.......................... "Hard Permalloy" recording/playback head x 1
"Hard Permalloy" playback head x 1
"Ferrite" erasing head x 1
Motor....................................................................... DC servo motor x 2
Wow and Flutter.......................................................... 0.09 % (WRMS)
±0.19% (DIN)
Fast Winding Time.............. Approximately 100 seconds (C-60 tape)
Frequency Response
-20 dB recording:
TYPE IV (Metal) tape...............................................20 to 16,500 Hz
TYPE II (High/Cr02) tape........................................ 20 to 16,000 Hz
TYPE I (Normal) tape..............................................20 to 16,000 Hz
Signal-to-Noise Ratio
Dolby NR OFF....................................................... More than 57 dB
Noise Reduction Effect
Dolby B-type NR ON........................... More than 10 dB (at 5 kHz)
Dolby C-type NR ON........................... More than 19 dB (at 5 kHz)
Harmonic Distortion..............................................No more than 0.8%
(at -4 dB: 160 nwb/m)
Input (Sensitivity)
LINE (INPUT) .............................100 mV (Input impedance 68 kil)
Output (Reference level)
LINE (OUTPUT)......................... 0.5 V (Output impedance 1.9 kil)
Headphones............................. 1.33 mW (Load impedance 32 il)
Subfunctions
• Automatic reverse
• DOLBY HX PRO system
• DOLBY B/C type NR systems
•
Music search over ±15 selections
• Synchronized copy start
•
High-speed and normal-speed copy (DECK I -► DECK II)
• Relay playback/blank skip
• CD • DECK SYNCHRO recording capability
• Peak level meter with peak-hold function
• Automatic space recording mute
• Automatic tape selector
• 93 System remote control available
• 2-mode electronic 4-digit twin tape counter
• Headphone jack
• FLEX system (Frequency Level Expander)
• TONS system (Tape Duplication Noise Suppressor)
• ALCA system (Auto Level Control with tape Analysis)
• AUTO BLE system
• LAST MEMORY
Miscellaneous
Power Requirements ........................... AC 220 ~ 230 volts, 50/60 Hz
Power Consumption..................................................................... 17 W
Dimensions....................................... 420 (W) x 125 (H) x 250 (D) mm
Weight (without package).............................................................4.0 kg
Accessories
Operating instructions......................................................................... 1
Connection cord with pin plugs.......................................................... 2
93 Remote control cord ...................................................................... 1
CD • DECK SYNCHRO control cord ...................................................1
NOTE:
Specifications and design subject to possible modifications without
notice, due to improvements.
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by
tugging the cord and never touch the power cord when your hands
are wet a this could cause a short circuit or electric shock. Do not
place the unit, a piece of furniture, etc., on the power cord, or
pinch the cord. Never make a knot in the cord or tie it with other
cords. The power cords should be routed in such a way that they
are not likely to be stepped on. A damaged power cord can cause
a fire or give you an electrical shock. Check the power cord regularly.
When you find it damaged, ask your nearest PIONEER authrized
service center or your dealer for a replacement.
Published by Pioneer Electronic corporation.
Copyright© 1996 Pioneer Electronic Corporation
All rights reserved.
33
<RRE1134>
En