Samsung VP-MX10A Benutzerhandbuch
Seite 33

�erman_
27
27_English
LCD-MONITOR EINSTELLEN
1.
Öffnen Sie den LCD-Monitor bis zu einem
Winkel von 90 �rad.
2.
Drehen Sie den Monitor in die für die Aufnahme
oder Wiedergabe gewünschte Stellung.
Bei einer Drehung um 180 �rad können Sie
den LCD-Monitor wieder an den Camcorder
zurückklappen, so dass die Anzeige nach
außen weist. Diese Einstellung ist besonders
für die Wiedergabe geeignet.
•
Hinweise zur Einstellung von Helligkeit und Farbe der Anzeige
fi nden Sie auf Seite 65.
�ewaltsames Drehen kann das Drehgelenk besch�digen, durch
welches LCD-Monitor und Memory Camcorder verbunden sind.
•
•
TASTE MENU VERWENDEN
1.
W�hlen Sie den gewünschten Modus durch
Drücken der Taste
MODE.
2.
Drücken Sie die Taste
MENU.
3.
Bewegen Sie den Cursor mit den
Steuertasten
( / / / )zum gewünschten Menüpunkt
oder zur gewünschten Einstellung. Drücken Sie
anschließend zum Best�tigen die Taste
OK.
4.
Drücken Sie die Taste
MENU, um die Einstellung zu beenden.
ACHTUNG
Heben Sie den Memory Camcorder nicht am LCD-Monitor hoch.
Dies kann zu Sch�den am �elenk und zum Herunterfallen des
�er�ts führen.
Die Taste
MENU funktioniert nicht im EASY.Q-Modus.
MENU button dose not operate in the EASY.Q mode.
ADJUSTING THE LCD SCREEN
1. Open up the LCD screen 90 degrees with
your fi nger.
2. �otate it to the best angle to record or play.
�f you rotate the LCD screen 180 degrees
to the lens side, you can close the LCD
screen with it facing out.
This is convenient during playback.
•
See pages 65 to adjust brightness and colour of the LCD
screen.
Over-rotation may cause damage to the inside of the hinge that
connects the LCD screen to the memory camcorder.
•
•
Do not lift the memory camcorder with holding the LCD screen.
�t can be a cause of sudden fall.
WARNING
USING THE MENU BUTTON
1. Set the desired mode by pressing the
MODE button.
2. Press the MENU button.
3. Move the cursor by pressing the Control button
(
) to select desired menu item,
and then press
Control button OK to confi rm.
4. Press the MENU button to fi nish.