Florabest FBM 575 B1 - Handbuch (Seite 38)

38
GB
The correct cutting height is around
30 – 45 mm for an ornamental lawn and
around 40 – 65 mm for a utility lawn.
Select a greater cutting height for
the first cut of the season.
Emptying the Grass Collec-
tion Box
Fill Level Indicator:
The fill level indicator ( 22) attached to
the side of the grass collection box ( 24)
shows when the grass collection box is full.
Fill level indicator open:
Grass collection box empty
Fill level indicator closed:
Grass collection box full
1. Stop the engine and wait until
the blade is stationary.
2. Lift the rear impact protection (7)
and remove the grass collection
box (22).
3. Empty (see “Disposal/Environ-
mental protection“) and reassem-
ble the grass collection box (22).
Mowing with the Mulch Kit
When mulch mowing, the grass is cut,
chaffed and spread on the lawn all in
one go. The cut grass serves as a natural
fertiliser.
Tips for Mulch Mowing:
• Cut the grass back by 2 cm from a
grass height of 4-6 cm.
• Use sharp cutting blades.
• Do not mow wet grass.
Cleaning and
Maintenance
Have any repair and main-
tenance work not described
in these instructions carried
out by a specialist workshop.
Use only original Grizzly re-
placement parts. Risk of ac-
cidents!
Carry out maintenance and
cleaning work strictly with
the engine switched off and
spark plug connectors re-
moved. Risk of injury!
Allow the equipment to cool
before any maintenance and
cleaning work. Elements of
the engine are hot. Risk of
burning!
Wear gloves when handling the
blade.
For cleaning and maintenance
work, also observe the Briggs &
Stratton instruction manual supplied.
We recommend contacting an au-
thorised Briggs & Stratton dealer for
maintenance work on the engine
(see Briggs & Stratton dealer list).
Cleaning and General Main-
tenance Work
Tilt the device back for cleaning
and maintenance jobs so that the
spark plug faces upwards.
Make sure that a second person
holds the device because there is a
danger of tipping backwards.