Festo Модули перемещения HSW - Handbuch (Seite 4)

The internal vane moves backwards and
forwards in the barrel by means of com-
pressed air applied to each side alterna-
tely.
Function and application
Important functions on the DSM-...
Durch wechselseitige Belüftung der
Druckluftanschlüsse schwenkt der In-
nenflügel im Gehäuse hin und her.
Safety Instructions Protective cover shop-made protective
grill Operation with
tightened stops Screwing length of
shock absorber Sliding down of the
mass
Page 17, 24, 29 21, 22, 24, 32 15, 17, 18, 20 30 23, 33
Adjustment of the without shock absorber with integrated shock absorber
stops static
pre-adjustment dynamic
fine-adjustment static
pre-adjustment dynamic
fine-adjustment
Page 15 28 18 30
Adaption to installa-
tion environment Second drive shaft Additional holes Shock absorber insert
Page 9 7 21, 34
Cushioning of inertia
moment (dynamic) Permitted values External cushioning Calculation Metallic knocking Swivel frequencies
Page 11, 12, 13 21, 22 10 26 32
Angular adjustment Symmetrical angle Scale of degrees Speed in swivel range
Page 15 16, 19 23
Taking-up of forces
and torques (static) Locking screws of
the stops Locking screws of
the movable mass Longitudinal and
lateral forces Lock nuts of the
shock absorbers
Page 17, 20 14 10 31
Fig. 2
DSM-...-270-...
9607b D/GB 4