Philips VR702 - Handbuch (Seite 22)

If you wish to repeat a recording on the same day and at the
same time every week:
• Programme the TIMER-block as usual introducing the starting
time and the ending time (steps 0^0).
•
When entering the date of the recording press button SEL untii
the indication ‘WKLY’ appears on the display:
njmn 1
csTAfrr O ri • O n - OATE n O
START ^ / _ / / _ ; WKLY
END O h r i n
i_ I ’ U U
• Now press the digit buttons 0-9 to enter the date, on which the
first recording is to be made.
•
Conclude the programming sequence as usual following steps
0 to O.
Please note:
• If during the programming sequence a button is not pressed for
1 minute, you have to start the programming of this TIMER-block
from the beginning again.
•
The content of the TIMER-blocks remains stored in the remote
control. You may therefore recall any of the TIMER-blocks to check
it or correct it as and when you please.
How do I recall and transmit stored TIMER-blocks ?
O Press button 9 RC .
The TIMER-block you used last, will appear on the remote
control display. All its programming details will be displayed.
o Using button + or — you may recall the other TIMER-
blocks.
o By pressing button 0)11 you may now transmit all stored
TIMER-blocks one by one to the video recorder.
How can I check or correct TIMER-block details
O Press button 9 on the video recorder or button ® RC on the
remote control.
O Press button + or — or the digit buttons 0-9 to select
the required TIMER-block to be checked or corrected.
o Now press button ® repeatedly. The display shows the
starting time, the ending time, the date and the programme
number one after another.
You can change the details by pressing button + or —
or the digit buttons
0-9 .
O Finally, press button ® or ® RC once more.
0
If you have used the remote control, transmit the changed
programming details to the video recorder by pressing
button
0))1 .
How can I cancel a TIMER-block
0
Press button
9
on the video recorder or button
9
RC on the
remote control.
0
Press button + or — or the digit buttons 0-9 to select
the required TIMER-block to be cancelled.
o Press button X . The TIMER-block has now been cancelled.
O If you have used the remote control, transmit the data to the
video recorder by pressing button 0))l, so that the TIMER-block
in the video recorder will be cancelled.
18