VEGA T32.10-11-30 - Handbuch (Seite 25)

GB
2383336 12/2008 GB/D
WIKA Operating Instructions Temperature Transmitter T32.10/11/30 2
12.4 Abbreviations used
PV: Process value
(primary value)
SV: Temperature of internal electronics (secondary value)
TV: Thermocouple compensation temperature (tertiary value)
AO: Analogue output
URV: Max. value (upper range value)
LRV: Min. value (lower range value)
LSL: Min. sensor limit (lower sensor limit)
USL Max. sensor limit (upper sensor limit)
13. Configuration with WIKA T32 configuration software
For installation please follow the instructions of the installation
routine. Configuration Software: free-of-charge download from the
www.wika.de homepage
13.1 Starting the Software
You can start the WIKA T32 software by double-clicking on the
WIKA T32 icon.
To get complete access to all functions and parameters
of the T32, you must choose the access level 'Special-
ist'. After installation, by default, no password is
activated!
13.2 Connection
Through the menu entry "connect" 
"Single instrument", it will try to establish
communication with a HART
® -capable
device with the HART ® Poll Address 0
(zero). If this attempt is unsuccessful, the
software will try to establish a Multidrop
connection. The addresses 1-1 will be
successively connected and will try to establish communication to a
connected device.
12. HART ® Communicator HC275 / 13. Configuration ....