Festo Мини-каретка SLT - Handbuch (Seite 27)

Technical specifications
Type SLT-6-... SLT-10-... SLT-16-... SLT-20-... SLT-25-... SLF-6-... SLF-10-... SLF-16-...
Design Double-acting cylinder with roller-bearing guided piston rod
Fitting position As desired
Medium Filtered, lubricated or non-lubricated compressed air (filter fineness: min. 40 µ m)
Permitted operating pressure 1.5 ... 10 bar 1.0 ... 10 bar 1.5 ... 10 bar 1.0 ... 10 bar
Connecting thread M5 M5 M5 G1/8 G1/8 M5 M5 M5
Theoretical working force
at 6 bar:
- extending
- retracting 34 N
25 N 94 N
79 N 242 N
218 N 376 N
317 N 590 N
495 N 17 N
13 N 47 N
40 N 121 N
104 N
Max. permitted impact energy
- with elastic cushioning (SL..-...-P)
- with elastic cushioning (PF-...-SLT)
- with hydraulic cushioning (SLT-...-CC-B)
0.08 Nm
0.0005 Nm
– 0.1 Nm
0.007 Nm
1 Nm 0.3 Nm
0.015 Nm
2 Nm 0.4 Nm
0.03 Nm
3 Nm 0.5 Nm
0.06 Nm
10 Nm 0.016 Nm
–
– 0.05 Nm
–
– 0.15 Nm
–
–
Max. permitted moment See catalogue specifications
Max. permitted speed 0.5 m/s 0.8 m/s 0.5 m/s 0.8 m/s
Minimum speedt 0.05 m/s 0.08 m/s 0.05 m/s 0.08 m/s
Cushioning Elastic cushioning in end positions (with SL..-...-P and PF-...-SLT)
Hydraulic cushioning in end positions (with SLT-...-CC-B with shock absorber YSRT-...)
Permitted temperature - 20
o
C ... max. + 60
o C
(Observe temperature range of proximity switch) +
Materials
(Free of copper and PTFE) Housing, slide cover, driver: Al, anodized
Piston rod, screws, guide: St
Piston: NBR
Seals: PU
Fig. 32
0608f D/GB 27