Festo SL-DSM-S-M5/M8-B Монтаж - Handbuch (Seite 2)

Assembly instructions (en)
743 702 / 2009-02NH
†‡
Sensor bracket
SL-DSM-S-M5/M8-B Festo AG & Co. KG
Postfach
D-73726 Esslingen
++49/(0)711/347-0
www.festo.com
1. Parts list
13451d_1
1 Sensor plate, left-hand (1x)
SL-DSM-S-…-B-LI
2 Sensor plate, right-hand
(1x)
SL-DSM-S-…-B-RE
3 Washer (2x)
B2,2
4 Socket head screw (2x)
M2x6
13451d_2
Not included in scope of
delivery:
5 Proximity sensor, inductive
The intended use of the sensor bracket is to fasten inductive proximity
sensors to the swivel module DSM-...-B.
Note
In order to avoid functional faults:
• Please select the appropriate accessories from our catalogue
www.festo.com/catalogue . Inductive proximity sensors are provided as
follows:
13451d_7
Type of
mounting Thread Rated operating
distance S
flush fitting M5x0.5 0.8 mm
M8x1 1.5 mm
2. Assembly
13451d_3
• Place the sensor plate 1 on
the cushioning mount (A) in
the groove (B).
• Turn the socket head
screw 4 with the washer 3
just lightly at first.
• Fasten the sensor plate 2
on the cushioning mount (C)
accordingly.
13451d_4
• Turn the two proximity sen-
sors 5 just far enough into
the sensor plates 1/2 that
they do not collide with the
stop lever (D)
! Table: Rated
operating distance S.
Note
In order not to damage the screw connection on the sensor plate 1/2
during assembly or adjustment of the proximity sensor 5:
• Be sure to use an open-ended spanner hold (F) ! SW12 to hold the
sensor plate 1/2 while tightening the lock nut (E).
13451d_5
• Turn the stop lever (D) to the
position of the proximity
sensor 5.
• Turn the proximity sensor 5
into the sensor plate until it
operates reliably
! Table:
Rated operating distance S.
• Fasten the lock nut (E) using
spanner (F) while holding the
sensor plate 1/2. Maintain
the permitted tightening
torque
! Operating instruc-
tions of the proximity sensor.
13451d_6
• Position the sensor
plate 1/2 using the
elongated hole so that the
proximity sensor 5 operates
reliably.
• Tighten the socket head
screw 4. Maintain the
permitted tightening torque.
1
3
2
4
5
1
A
B
4 3 2
C
5 5
D
D
5
E
F
1/2
5
1/2
4
0.4 Nm
_ 10%
D 5 1/2
4