Festo SL-DSM-63-B Монтаж - Handbuch (Seite 2)

Assembly instructions (en)
737 671 / 2008-09NH
†‡
Sensor retainer
SL-DSM-63-B Festo AG & Co. KG
Postfach
D-73726 Esslingen
++49/(0)711/347-0
www.festo.com
1. Parts list
13104d_1
1 Sensor retainer (2x)
SL-DSM-63-B
2 Countersunk screw (2x)
M3x4
13104d_2
Not included in scope of
delivery:
3 Proximity
sensor (2x)
SME/SMT-8…
Note
The cables may break if overstressed.
• Fasten the cables of the proximity sensor 3.
2. Assembly
13104d_3
• Fasten the sensor retainer 1
in the groove of the cushion-
ing mount (A) with the
screws 2. Maintain the
permitted tightening torque.
The magnet (B) which serves for
position recognition is situated
in the stop lever (C).
13104d_4
• Swing the stop lever (C) into
the desired end position.
• Place the proximity
sensor 3 in the groove of
the sensor retainer 1.
• Position the proximity sen-
sor 3 in the groove so that it
switches in the end position
of the stop lever (C).
• Fasten the proximity
sensor3 in accordance with
the operating instructions.
2
1
A
1
2
B
3
C
0.8 Nm _ 30%
C
B
3