VDO WL GP7 - Handbuch (Seite 218)

94 95
CORRECT BIKE mOUNT PLACEmENT:
INSTALLATION:
WARNING: the cable ties and the mount hold
steady on the handlebar. The device instead can
be removed just pulling down the safety lever and
slide it out.
WARNING!
Follow these instructions for a correct installation of
the mount on the bike:
Switch on the device. The device is now ready to be used.
Place the mount on the handlebar in the position you
prefer, and fix it with the cable ties.
Slide the device on the mount (trough the lead-lines
present on its back) until you hear a click.
Stick the double-sided tape and then fix the rubber pad to
the back of the mount.
Install the cable ties in the mount.
HOW TO INSTALL
ON THE BIKE
SWITCH THE DEVICE ON:
Press the on/off button constantly (for 3-5
seconds), but without forcing, to switch the
device on.
VDO GP 7 is now ready to be used.
TURN THE DEVICE OFF:
Pressing the on/off button (B) while the device
is on, to:
- turn it off, terminating the current session
(“Power off”).
- put the device in stand-by mode (“Sleep”).
- or use “Cancel” to return to the navigation
software.
POWER OFF
STAND-BY
CANCEL
POWER ON/OFF
NO YES
POWER ON
1 2