Festo Рабочие компоненты для VTIA, ISO 15407-2 - Handbuch (Seite 59)

VABF-S4-1-V2B1…
Festo – VABF-S4-1-V2B1…-D2 – 1212a English 59
Actuating the manual override with stop (detenting actuation)
• Use a screwdriver to press down the plunger of the manual
override as far as possible. Then turn the plunger 90° in a
clockwise direction.
The valve reverts to the switching position and remains
switched.
• Then turn the plunger 90° in an anti-clockwise direction.
Then release the plunger.
The valve reverts to the rest position.
Tab. 7 Manual override, detenting
7.2 Changing settings and values
Information such as settings and values can be changed, section 6.3 “EDIT mode”.
Note
The last saved settings are retained in the event of a power failure.