Spektrum SPM2800US DX10t - Handbuch (Seite 18)

18 SPEKTRUM DX10t • RADIO INSTRUCTION MANUAL
EN
8-12 Preflight Check
A Preflight checklist can be programmed that is a list of
do’s before each flight (EX battery charged) This list can
be programmed to appear before each flight everytime
the TX is turned on or only once when a new model is
selected. The list must be checked off (check box) before
the flight. RF modulation can be on or off during this
phase.
8-14 Bind
This function binds the receiver to the transmitter.
Highlight BIND with the Roller in the System Setup.
Display shows the actual model. Insert bind plug into the
receiver and power on the receiver. Push BIND on radio
with the Roller button. The receiver LED will flash during
binding, after a moment the flashing stops and the LED
remains on, indicating the binding process is finished.
Remove the bind plug.
8-15 Trainer
This configuration shows you what functions are
controlled by Master or Slave. Functions are free to
assign.
8-16 Clear Back Auto trim Setup
Clear Back with left or right Stick Switch Button or left or
right Front Stick Button Functions back with left or right
Stick Switch Button or left or right Front Stick Button
You can select: Function disabled Auto trim functions
with left or right Stick Switch Button or left or right Front
Stick Button or Function disabled You can assign these
settings only one time.
8-17 Analog switch Setup
Anolog Switch Setup allows all sticks and pots to be used
as kick point to turn on functions like mixes.
8-18 System Settings
Basic settings are programmed in the System Settings
menu:
• User Name
• Display contrast ranges from 1 to 20. The Standard
contrast is 10.
• Duration of Backlight: You can choose from off to on
to intermittent settings: 3 seconds (s), 10s, 20s, 30s,
45s, und 60s.
• Mode: 4 Modes are available
• Battery: LiPo
• Battery Alarm: 6.4 to 8.3 Volt
• Languages: German and English
• Region EU and France
• Automatic Shutoff: disabled 5, 19, 30, and 60 minutes
With NEXT, you can select:
• System Sound: Active/Inhibit
• Vibrator: Active/Inhibit
• Trim Display: Inhibit, Boxed Boxes, Boxes Arrows
With NEXT, you can see:
• Serial Number
With NEXT, you can calibrate the Sticks left, right and
center as well as calibrate the roller left and right.
8-19 Transfer SD Card
With this menu you can transfer model memories onto
an SD Card and create model memory space in the
transmitter. The included 1GB card has the capacity to
store up to 3000 Models.
Options in the menu are:
• Import Model : One selected Modell will be
transferred from card.
• Import all Models: All models will be transferred from
card.
• Export Model: One selected model will be exported
to card
• Export all Models : All models will be exported to
card.
• Update Firmware
8-13 Frame Rate
Frame Rate is 22ms. If 11ms is selected, digital servos
must be used. Within the Frame Rate screen, you can
also change your transmitter modulation mode from
DSM2 to DSMX.