Spektrum SPM2800US DX10t - Handbuch (Seite 23)

23 SPEKTRUM DX10t • RADIO INSTRUCTION MANUAL
EN
10-6 Trim Steps
In this Menu, you can adjust trim sensitivity. The means
value is 10 with smallest trim steps. Largest step is 1, no
steps with 1.
10-7 Model Copy
The Model Copy function copies the currently selected
model programming to another model memory
10-8 Model Reset
The Model Reset resets the programming for the selected
model to factory defaults.
10-9 Warnings
In this menu, you select what settings or functions
you wish to assign to warnings that will activate if
programmed parameters are exceeded.
10-10 Telemetry
The transmitter offers different Telemetry functions. This
means the transmitter sends signals to the model and
receives signals via a telemetry module and sensors
mounted within the model. For this function, you need a
telemetry module and sensors that are sold separately.
With telemetry, you check the following values:
• RPM
• Voltage Flight Battery
• Temperature
• Altitude
• Airspeed
• Receiver Battery voltage
• Flight Log Data
• 8G G-Force
• 40G G-Force
• Variometer
• GPS
• LiPo Battery Capacity
• High Current 150A Sensor
• JetCat Turbine Sensor
10-11 Preflight Check
Please refer to wing-type model programming for
instructions.
10-5 Channel Assignment
This menu is for assigning functions to channels. The
Display shows 6 servos you can assign.
Channel 1 Throttle
Channel 2 Aileron
Channel 3 Elevator
Channel 4 Rudder
Channel 5 Gyro
Channel 6 Pitch
Channels 7 – 10 are not assigned.