Spektrum SPM2800US DX10t - Handbuch (Seite 26)

26 SPEKTRUM DX10t • RADIO INSTRUCTION MANUAL
EN
11-8 Range Test
The Range Test is a safety feature. Perform a range
check at the beginning of each flying session to confirm
system operation. This function reduces the RF Output in
order to confirm the RF Link is working correctly.
In the Functions menu, select Range Test. The display
shows FULL POWER. Push the Roller and the display
shows REDUCED POWER.
With your model restrained on the ground, stand 28
meters (about 90 feet) from the model. You should have
full control of the model with the transmitter in Range Test
Mode.
If control issues occur, contact the appropriate Horizon
Product Support office for assistance.
11-9 Timer
The system has two timers that can be set individually.
Parameters for timers are:
• Mode: Stopwatch/Countdown
• Time Period
• Starting Point
You can assign the timer to any switch. Warnings are
Sound and/or Vibration.
If both timers are selected, both timers will be visible on
the display.
11-10 Telemetry
The transmitter offers different Telemetry functions. This
means the transmitter sends signals to the model and
receives signals via a telemetry module and sensors
mounted within the model. For this function, you need a
telemetry module and sensors that are sold separately.
With telemetry, you check the following values:
• RPM
• Voltage Flight Battery
• Temperature
• Altitude
• Airspeed
• Receiver Battery voltage
• Flight Log Data
• 8G G-Force
• 40G G-Force
• Variometer
• GPS
• LiPo Battery Capacity
• High Current 150A Sensor
• JetCat Turbine Sensor
11-11 Servo Monitor
The Servo Monitor gives you an overview on all active
servos and their functions.