Spektrum SPM2800US DX10t - Handbuch (Seite 24)

24 SPEKTRUM DX10t • RADIO INSTRUCTION MANUAL
EN
10-13 Bind
This function binds the receiver to the transmitter.
Highlight BIND with the Roller in the System Setup.
Display shows the actual model. Insert bind plug into the
receiver and power on the receiver. Push BIND on radio
with the Roller button . The receiver LED will flash during
binding, after a moment the flashing stops and the LED
remains on, indicating the binding process is finished.
Remove the bind plug.
10-14 Trainer Mode
This displays the function allocation of Master and Slave
Channels referring to the model function. Functions can
be changed here.
10-15 Clear Back Auto Trim Setup
This function allows you to assign the Clear, Back and
Auto-Trim functions to your left and right tip switches The
Left and Right Stick Type functions allow you to change
the stick buttons from a momentary type switch to a
three-position switch
To use the three position switch function, you will need to
purchase the optional gimbal sticks.
10-16 Analog Switch Setup
Anolog Switch Setup allows all sticks and pots to be used
as kick point to turn on functions like mixes.
10-17 System Setting
Please refer to wing-type model programming for
instructions.
10-18 Transfer SD Card
With this menu you can transfer model memories onto
an SD Card and create model memory space in the
transmitter. The included 1GB card has the capacity to
store up to 3000 Models.
Options in the menu are:
• Import Model : One selected Modell will be
transferred from card.
• Import all Models: All models will be transferred from
card.
• Export Model: One selected model will be exported
to card
• Export all Models : All models will be exported to
card.
• Update Firmware
10-12 Frame Rate
Frame Rate is 22ms. If 11ms is selected, digital servos
must be used. Within the Frame Rate screen, you can
also change your transmitter modulation mode from
DSM2 to DSMX.