Festo DRQD-40 ... 50-... - Handbuch (Seite 50)

DRQD−...
Festo DRQD−... 0907e English
50
Adjustment with pneumatic cushioning for DRQD−...−PPVJ
Note
S Be sure to comply with the specifications
for the safety components:
ć Do
not remove retaining rings
(for DRQD−16 ... 32).
ć Turn in the threaded sleeve until it is
completely flush to the lock nut
(for DRQD−40/50).
The safety components are used to limit
the maximum permissible rotation angle
setting. Impermissible handling of the
safety components makes it possible to
turn in the threaded sleeve too deeply.
For adjustment of the end positions:
1. Turn the moveable mass into an end posiĆ
tion by hand.
2. Loosen the lock nut of the threaded sleeve
(only for DRQD−40/50)
3. Screw in the respective threaded sleeve
with an Allen key until the desired end
position adjustment has been reached.
Fig. 14
DRQD−16−...−32
DRQD−40/50
Fig. 15