Festo DRQD-40 ... 50-... - Handbuch (Seite 62)

DRQD−...
Festo DRQD−... 0907e English
62
Electrical installation
For sensing of mid−position and end position:
S Place the SME−8/SMT−8 proximity switch in the following slots:
Sensing
type End position Mid−position
Slot position 5 (at the
semi−rotary
drive) aI (at the
mid−position
module)
Fig. 46
For use of the flanged shaft with energy
through−feed:
S Wire the electrical connections according to the following table:
DRQD−16/20/25/32−E.. DRQD−40/50−E..
(Z)
(T)
+
_
Ц
Ц Ц
Ц ЦЦ
ЦЦ
ЦЦ Ц
Ц Ц
In order to use the 4−pin connection socket, the T−plug
connector (T) can be removed.
Through−feed cover plate (Z) for DRQD−16/20−E.., for
mounting of the adapter kit; rotatable by 90°. The allocation of the connection plug
with the corresponding connection
socket at the outlet location is indicated
by numbered labels.
Plug C Pin 1 (+) Pin 2 (Signal B) Pin 3 ( ć ) Pin 4 (Signal B)
Socket A Pin 1 (+) ć Pin 3 ( ć ) Pin 4 (Signal B)
Socket B Pin 1 (+) Pin 4 (Signal B) Pin 3 ( ć ) ć
Fig. 47: Supply voltage for DRQD−16/20/25/32−E..
Fig. 45
5
aI