6 spezifische fehlertolerante zustände, 1 wie ein fehlertoleranter omm aktiv wird, Installation, verwaltung und wartung – AASTRA SIP-DECT (Release 1.8)-Installation- and Administration Guide DE Benutzerhandbuch
Seite 75: Aastra

Installation, Verwaltung und Wartung
Aastra
depl-0900/
1.8
Seite: 75 (107)
PBX not reachable
(registration and OPTIONS
request failes)
OMM sync NOK and
PBX unreachable
In this state the DECT air interface might not be in a definite
state, when both OMMs are active but do not see each other!
In this case a network problem occurs (broken into two parts)
which is very theoretical and we can not handle. There might
be two DECT systems with the same PARK active. For this
case it is random which RFP is connected to the one or to the
other OMM.
In this state hand over might be reduced (not all RFPs might
be synchronised).
OMM sync OK
Another OMM is running
for a longer period
OMM sync OK
OMM sync NOK
OMM Start up
or Restart
Synchronised
Inactive OMM
OMM star up sync
OK
Unsynchronised
Inactive OMM
OMM sync NOK and
PBX reachable
OMM sync OK
other OMM is active
OMM sync NOK
Synchronised
Active OMM
Unsynchronised
Active OMM
No OMM is active and
I have the lowest IP address
OMM sync OK
only one OMM is active
PBX not reachable
(registration and
OPTIONS request
failes)
PBX reachable
(registration or OPTIONS
request OK)
„OMM sync OK“ means: OMMs are synchronised with each other and are able to exchange their operational states
„OMM sync NOK“ means: OMMs are not synchronised with each other and are not able to exchange their operational states
OMM – Reset with exit code 45
OMM – Reset with exit code 46
5.6
Spezifische fehlertolerante Zustände
Einige Aspekte müssen beachtet werden, falls der OMM-Zustand sich dann
ändert, wenn sie nicht synchronisiert sind.
5.6.1
Wie ein fehlertoleranter OMM aktiv wird
Wie die vorstehenden Abbildung zeigt, muss der Standby-OMM im Falle
eines unsynchronisierten OMM-Zustands entscheiden, ob er aktiv wird oder
nicht.
Zu diesem Zweck versucht der OMM Kontakt zum konfigurierten SIP-Proxy
und Registrar aufzunehmen. Der OMM startet eine SIP-Registrierung für das
Engegerät mit der niedrigsten Telefonnummer und sendet eine
Anforderungen „OPTIONS“ an den konfigurierten Proxy. Bei Antwort wird der
SIP-Proxy/Registrar als erreichbar betrachtet und der OMM wird aktiv.
5.6.2
Behandlung, wenn beide OMMs nicht synchronisiert sind
In einem unsynchronisierten OMM-Fehlertoleranz-Zustand ist die Verbindung
zwischen den OMMs unterbrochen. Bei einem Netzwerkproblem können
beide OMMs in diesem Zustand sein. Während dieser Zeit arbeitet ein
inkonsistentes OpenMobility-System unter einigen Einschränkungen.