Festo Генератор вакуума OVEM, дюймовый - Handbuch (Seite 65)

OVEM
Festo ć OVEM ć 1004b English 65
2.2 Operating states of the vacuum generator
SHOW mode EDIT mode TEACH mode
Fig. 3: Operating states of the OVEM
RUN mode or operation
The RUN mode is the basic or operating status of the vacuum generator OVEM.
The following are shown in the RUN mode:
Ĉ the current measured value (relative pressure) as well as
Ĉ the signal states
ć the switch outputs (Out A/Out B)
ć the switch input and
ć the solenoid valves.
SHOW mode or display
You can switch from the RUN mode to the SHOW mode. The set data are shown in the SHOW mode,
è Ăchapter 6.2 SHOW mode.
EDIT mode
You can switch from the RUN mode to the EDIT mode. In the EDIT mode you can set the vacuum generĆ
ator or modify the settings. In this status you can also actuate the solenoid valves via the LCD display
(electronic manual override FORC),
è Ăchapter 6.3 EDIT mode.
TEACH mode
You can switch from the RUN mode to the TEACH mode. The TEACH mode serves for fast configuration
of the data of the vacuum generator. The data can be modified if required via the EDIT mode,
è Ăchapter 6.4 TEACH mode.