Metrohm tiamo 1.2 Manual - Handbuch (Seite 220)

194 Database
Scaling
Start value
1 E-8 ... [ 0.0 ] ... 1 E+8
Initial value for scaling the x axis.
End value
1 E-8 ... [ 1000.0 ] ... 1 E+8
Final value for scaling the x axis.
Curve field - y1 axis
Parameters for the graphical display of the curve on the y1 axis (left-hand y axis).
s
X pos.
0.0000 ... (max. page width) mm
x-position within the permitted section.
Y pos.
0.0000 ... (max. page height) mm
y-position within the permitted section.
Width
0.0000 ... (max. page width) mm
Width of curve field.
Height
0.0000 ... (max. page height) mm
Height of curve field.
Command type
[ DET ], MET, SET, KFT, KFC, MEAS, MEAS T/Flow
Selection of the type of command for which a curve is to be shown.
Command name
[ not defined ], 50 characters
Name of the command for which a curve is to be shown. With not defined
the first curve present in the determination with the selected Command type
will be produced as default.
Note
In the command name, the index in the format .# must be specified additionally
(e.g. Chloride.1 ).